Autobrite Enrich Massi 500ML

Product Features

• Cut 5/10 – Gloss 8/10
• Ideal for removing light weathering
• Removes swirl marks, scratches & 2500 grit sanding marks
• Suitable for Rotary Polisher and DA
• Forgiving, easy to use diminishing formula with extended working time capabilities
• Silicone free

How to use

Before Machine polishing your vehicle ensure that you have cleaned and decontaminated the paintwork thoroughly to ensure that the surface is completely free of contaminants that could potentially damage the vehicle paintwork or your machine polishing pad. We recommend masking any delicate areas that could be damaged through contact with the machine polisher such as grilles, badges etc.
Once you have masked the vehicle and chosen your pad and compound combination you are ready to polish.

If you are using a new polishing pad we recommend applying a greater quantity of compound to “prime” the pad for use.
Working on a area of approx 15×15 inches, begin polishing at a low speed to spread the compound and gradually work up through the speeds until the desired machine speed is reached.
Once you are at the appropriate machine speed, work the compound until the haze begins to clear, this is the abrasive component of the compound breaking down and starting to polish the surface after cutting, while machine polishing a close eye should be kept on the panel temperature. Once the compound has reached the clear stage it can then be removed with a soft pile buffing towel to reveal the correction status. We recommend the use of IPA (Panel prep) to remove any residual polishing oils and reveal the true level of correction.

Once you are happy with the condition of your paintwork a sealant or wax would need to be applied for protection.